HPI Flux Shot 4300Kv Brushless Motor

Add a shot of power to your car or truck with the Flux Shot Brushless Motor! Rated at 4300KV (equivalent to a 9-turn modified brushed motor), the Flux Shot is the perfect way to get into brushless power for any car or truck! Combine with the HPI-101749 Flux Reload v2 Brushless ESC for a major boost to any standard brushed motor RTR kit!

This is the standard motor in the Bullet Flux truck, so you know it's got loads of power!

Specifications:

• 9T/4300KV 540 sized Motor
• Diameter - 35.8mm
• Length - 50mm (without shaft)
• Shaft Diameter - 3.17mm
• Shaft length - 15mm
• Weight - 165g
• Machined aluminum heatsink casing.
• Ballraced

NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.