MJX 1/16 Hyper Go 4WD Off-road Brushless 3S RC Buggy [16207]

Purchase spare batteries here

1:16 scale brushless racing buggy that reaches a top speed of 62 km/h thanks to high-performance drive and 3S LiPo power. Many newly developed components such as aluminium oil pressure shock absorbers, metal CVD drive shafts, metal cardan shaft, metal gearbox and metal differentials ensure high durability of the off-road racer. An active fan on the engine provides optimal cooling. The adjustable suspension for more directional stability and a wheelie bar for more driving stability round off the package. The entire electronics are protected against splash water and allow unrestricted outdoor use. The generously dimensioned high-grip tyres made of soft rubber ensure full grip on any surface at full throttle. If you don't want to go so fast, there is a switch on the transmitter that reduces the maximum speed to 70 percent. The handy 3-channel remote control transmits all functions without interference and the 2.4 GHz system also allows several models to be operated in parallel. The model is available as an RTR (Ready-to-Run) package, i.e. all components - except for household batteries for the remote control - are already included.

Features:

• All drive components made of metal (pinions, shafts and differentials): for long component life
• Metal cardan shaft: for wear-free drive to the axles
• Metal CVD drive shafts: on all axles for direct drive
• 3S LiPo power with 11.1V, 25C and 1050mAh in a specially designed hardcase battery pack
• Professional brushless racing motor for high speeds of up to 62km/h
• Fast steering servo for agile direction changes on any surface
• Oil-pressure aluminium shock absorbers
• Metal propshaft
• Bonnet with body clips and rubber tabs for safe removal
• Racing competition look of the body
• Receiver, ESC and motor separate
• Active fan on motor for optimum cooling
• Robust body 
• Metal front and rear chassis construction
• Composite chassis for durability
• Wheelie bar included

Specs:

• Scale: 1:16
• Length: 275mm (incl. wheelie bar: 320mm)
• Width: 210mm
• Height: 105mm
• Weight: 1054g incl. battery
• Wheelbase: 175mm
• Track width front: 175mm
• Track width rear: 175mm
• Ground clearance: approx. 25mm
• Front wheels: outer diameter/width 75/34mm
• Rear wheels: Outside diameter/width 75/34mm 
• Rim diameter: 55mm
• Gearbox: Metal
• Front shock absorber: 60mm
• Rear damper: 60mm
• Brake: Electronic
• ESC: Brushless 45A
• Motor: 2845 Brushless
• Drive system: Cardan metal
• Steering servo: Mini
• Main material: Composite plastic
• Battery compartment dimensions: 110x35x24mm
• Battery: LiPo 3S 11,1V 1050mAh, 25C, Hardcase, Deans connector / T-Plug, 78x34x30mm, 100g
• Drive time: approx. 10-12min
• Top speed: up to 62km/h
• Remote control: 3-channel, 2,4GHz
• Range: approx. 100m
• Charger: USB balancer charging cable with 11.1V and 1.2A output power
• Charging time: approx. 45-60min

Contents:

• Vehicle
• Remote control
• Battery
• Charging cable
• Screw set
• Tools
• Wheelie bar
• Instruction manual