Zap-A-Gap Z-Poxy Finishing Resin 4oz/118ml (set)

Z-Poxy Finishing Resin Z-POXY 2 PART FINISHING RESIN Very low odor Non Brittle 30 Minute working time, Hard in 3-4 Hours, Full cure in 24 Hours Sands easily and accepts paint primers wonderfully USES: Z-POXY FINISHING RESIN is a premium light weight, two part epoxy, laminating finishing resin. Whether fiber-glassing the center section of a wing or the entire airplane, Z-POXY is the easiest to use and best you can buy. Great for sealing model boat hulls, inside and out. Use to seal all engine and fuel tank areas. It is absolutely the best for sheeting foam wing panels. It will bond to itself, and it does not get brittle with age. Z-POXY FINISHING RESIN is easy to mix, simply combine equal parts by volume. It's thinner formula is perfect as-is.  Z-POXY FINISHING RESIN can also be used to seal and prepare all types of wood projects for painting. OUTDOOR: Repair your fiberglass with Zap Finishing Resin.  Use Zap Finishing Resin to weatherproof wood and other outdoor tools. WOODWORKING: Create an antique look with the golden hue of Zap Finishing Resin.  If you are working on a project that will be outdoors, you may want to consider using Zap Finishing Resin as it does not get damaged by the element. HELPFUL HINT: Z-POXY FINISHING RESIN will penetrate into porous wood. Several applications may be required to fill and level the surface. Let each application cure. Sand between coats. To clean up any uncured or unmixed epoxy, use isopropyl alcohol or denatured alcohol.  Mix Z-POXY FINISHING RESIN in a clean plastic cup or on a non porous surface like flexible plastic. Mix only enough epoxy as needed, Any excess epoxy cannot be saved after it has been mixed. Pot-life and cure-time will vary when the epoxy is thinned.